View Thread
Point Defense Systems » Point Defense Systems Remastered Project » PDS General Discussions
Page 4 of 5: 12345
 Print Thread
Da Chat
DevilKhan
Top  #61 Print Post
Posted on 11-10-2007 00:14
change with your own password in inspircd.conf

in inspircd.conf - change the Server Description and Admin Information - Oper Name and Services Link and U-Line - the Oper hostnames under Operator Composition to your own name.

127.0.0.1 in the IP address Link I use to connect - localhost
or you can use your own IP address to connect to.

in InspIRCd when you are connected to the Server - you could give yourself mode +n +* for the Server Notice Masks when you are an Oper.

http://pastebin.com/f6d92ac66 - inspircd.conf

this should work I *think*

I use UnrealIRCd + Anope
 
Homdax
Top  #62 Print Post
Posted on 11-10-2007 09:55
It runs.
Can't connect though, but that is probably serverwise since the service is not whitelisted and probably neither are the ports used.

Code Download source  







# When linking servers, the openssl and gnutls transports are largely

# link-compatible and can be used alongside each other or either/or

# on each end of the link without any significant issues.


Is there any module I should bother with configuring...any at all?
And can I set other chmod on the folder irc.hwaccess.net since rite now browsing it gives the files, which I do not like. Conf is wide open.
Edited by Homdax on 11-10-2007 09:57
king-o'da'bigfile
 
DevilKhan
Top  #63 Print Post
Posted on 11-10-2007 10:01
That's why I need the IP address for this.

3 IPs linking to it atm which means 3 chances :)


Code Download source  

(10:04:02) * Connecting to irc.hwaccess.net (6667)

(10:04:03) * Unable to connect to server (Connection refused)
Edited by DevilKhan on 11-10-2007 10:06
 
Homdax
Top  #64 Print Post
Posted on 11-10-2007 10:05
Just ping it...
king-o'da'bigfile
 
Homdax
Top  #65 Print Post
Posted on 11-10-2007 10:07
http://pastebin.com/m14a50dd9
king-o'da'bigfile
 
Homdax
Top  #66 Print Post
Posted on 11-10-2007 10:08
Whatdo you mean fix this...

Code Download source  

#

# FIX THIS

#

 

#


#

      ipaddr="penguin.box.com"

#

      port="7000"

#

      allowmask="69.58.44.0/24"

#

      autoconnect="300"

#

      failover="hub.other.net"

#

      timeout="15"

#

      transport="gnutls"

#

      bind="1.2.3.4"

#

      statshidden="no"

#

      hidden="no"

#

      sendpass="outgoing!password"

#

      recvpass="incoming!password">

#

 

#


#

      ipaddr="127.0.0.1"

#

      port="7000"

#

      allowmask="127.0.0.1"

#

      sendpass=""

#

      recvpass="">
king-o'da'bigfile
 
DevilKhan
Top  #67 Print Post
Posted on 11-10-2007 10:22
Ah you haven't filled that in
but you can leave everything #'s out as for the moment we are only having this one no services either.

Yeah I know that's a pastebin flaw adding in a line with # every second line :/

but that's just an edit for you to do

probably irc.hwaccess.net should fix it
hub.hwaccess.net (not required on dns table)

ipaddr="irc.hwaccess.net"
port="7000"
allowmask="83.140.32.149"
autoconnect="300"
failover="hub.hwaccess.net"
timeout="15"
transport="gnutls"
bind="83.140.32.149"
statshidden="no"
hidden="no"
sendpass="outgoing!password"
recvpass="incoming!password">
 
Homdax
Top  #68 Print Post
Posted on 11-10-2007 10:36
ok, implemented that and uploaded...what do you suggest hub.hwaccess.net should be used for?

http://pastebin.com/m786f9fc7
king-o'da'bigfile
 
Homdax
Top  #69 Print Post
Posted on 11-10-2007 10:37
Code Download source  

Loading core commands.......................................................

InspIRCd Process ID: 6916





A total of 0 modules have been loaded.


no errors...:D
Edited by Homdax on 11-10-2007 10:37
king-o'da'bigfile
 
DevilKhan
Top  #70 Print Post
Posted on 11-10-2007 10:40
nothing you only have 1 server atm

EG

# # ipaddr="irc.hwaccess.net"
# port="7000"
# allowmask="83.140.32.149"
# autoconnect="300"
# failover="hub.hwaccess.net"
# timeout="15"
# transport="gnutls"
# bind="83.140.32.149"
# statshidden="no"
# hidden="no"
# sendpass="outgoing!password"
# recvpass="incoming!password">

the same with the services, although I'd recommend having them
 
DevilKhan
Top  #71 Print Post
Posted on 11-10-2007 11:08
also give me a shout when you get it up and running I'm still in the old registered channel on the irc.hwcommunity.com #pds Smile
 
Homdax
Top  #72 Print Post
Posted on 11-10-2007 11:23
Hmmm

Quote


If you want to link servers to InspIRCd you must load the m_spanningtree module!


Do I need that?
king-o'da'bigfile
 
DevilKhan
Top  #73 Print Post
Posted on 11-10-2007 11:43
kinda you do, but for now you don't so just leave it for now.
 
Homdax
Top  #74 Print Post
Posted on 15-10-2007 07:47
Got reply from server guy this weekend and he will whitelist the service, however we have to run on a diff port, say 40569. So I am editing accordingly.
king-o'da'bigfile
 
DevilKhan
Top  #75 Print Post
Posted on 15-10-2007 11:37
0_o... the default port "6667" or just the PID?

:werd:
 
Homdax
Top  #76 Print Post
Posted on 15-10-2007 14:52
Contraorder: No ports changed. The IRC is running. Has been for a few hours.
king-o'da'bigfile
 
DevilKhan
Top  #77 Print Post
Posted on 15-10-2007 16:47
Code Download source  

(16:45:16) * Connecting to irc.hwaccess.net (6667)

(16:45:17) * Unable to connect to server (Connection refused)

(16:45:22) * Connect retry #1 83.140.32.145 (6667)

(16:45:24) * Unable to connect to server (Connection refused)


not to me it isn't

what IP is it under? 83.140.32.145?
is it actually running in the background

try this in putty
ps x
Edited by DevilKhan on 15-10-2007 19:45
 
Homdax
Top  #78 Print Post
Posted on 16-10-2007 12:32
Code Download source  

14011 ?        Ss     0:00 /home/h/hwaccessnet/hwaccessnet/hwaccess.net/irc/bin/

26679 ?        S      0:00 sshd: hwaccessnet@notty

26681 ?        Ss     0:00 -bash

26753 ?        S      0:00 sshd: hwaccessnet@pts/1

26755 pts/1    Ss     0:00 -bash

27040 pts/1    R+     0:00 ps x


Mind You ZERO modules loaded.
Edited by Homdax on 16-10-2007 12:33
king-o'da'bigfile
 
DevilKhan
Top  #79 Print Post
Posted on 16-10-2007 19:30
Well have you even been on it yet?
still down anyway that I'm sure of
 
DevilKhan
Top  #80 Print Post
Posted on 16-10-2007 22:43
always unrealIRC it's more simple to edit really
 
Page 4 of 5: 12345
Jump to Forum