View Thread
 Da Chat
|
|
| Homdax |
Posted on 18-09-2007 12:40
|
 Posts: 762 Joined: August 30 2005 |
:rol: :no: king-o'da'bigfile
|
|
|
|
| DevilKhan |
Posted on 18-09-2007 19:21
|
 Posts: 49 Joined: April 19 2007 |
o_0? what now... |
|
|
|
| TelQuessir |
Posted on 19-09-2007 18:02
|
 Posts: 2598 Joined: August 30 2005 |
I told you you should go easy on the Irish sarcasm - Homy obviously can't take it  |
|
|
|
| Homdax |
Posted on 20-09-2007 11:07
|
|
Posts: 762 Joined: August 30 2005 |
king-o'da'bigfile
|
|
|
|
| Homdax |
Posted on 25-09-2007 19:42
|
|
Posts: 762 Joined: August 30 2005 |
Devilkhan: See what you can do with this conf-file. It is giving me headache. [code]######################################################################## # # # ___ ___ ____ ____ _ # # |_ _|_ __ ___ _ __|_ _| _ \ / ___|__| | # # | || '_ \/ __| '_ \| || |_) | | / _` | # # | || | | \__ \ |_) | || _ <| |__| (_| | # # |___|_| |_|___/ .__/___|_| \_\\____\__,_| # # |_| # # ____ __ _ _ _ # # / ___|___ _ __ / _(_) __ _ _ _ _ __ __ _| |_(_) ___ _ __ # # | | / _ \| '_ \| |_| |/ _` | | | | '__/ _` | __| |/ _ \| '_ \ # # | |__| (_) | | | | _| | (_| | |_| | | | (_| | |_| | (_) | | | | # # \____\___/|_| |_|_| |_|\__, |\__,_|_| \__,_|\__|_|\___/|_| |_| # # |___/ # # # ##################################||#################################### #||# ##################################||#################################### # # # This is an example of the config file for InspIRCd. # # Change the options to suit your network # # # # $Id: inspircd.conf.example 7763 2007-08-19 20:53:53Z brain $ # # # ____ _ _____ _ _ ____ _ _ _ # # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | # # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | # # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| # # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) # # # # Lines prefixed with READ THIS BIT, as shown above, are IMPORTANT # # lines, and you REALLY SHOULD READ THEM. Yes, THIS MEANS YOU. Even # # if you've configured InspIRCd before, these probably indicate # # something new or different to this version and you SHOULD READ IT. # # # ######################################################################## # # # Unalphabeticalise the modules list at your own risk # # # ######################################################################## #-#-#-#-#-#-#-#-#-#-#-#- SERVER DESCRIPTION -#-#-#-#-#-#-#-#-#-#-#-#- # # # Here is where you enter the information about your server. # # # # Syntax is as follows: # # # # # networkemail="Email address shown on g/k/z/q lines" # # network="MyNetwork"> # # # network="Omega"> #-#-#-#-#-#-#-#-#-#-#-#- ADMIN INFORMATION -#-#-#-#-#-#-#-#-#-#-#-# # # # Describes the Server Administrator's real name (optionally), # # nick, and email address. # # # # Syntax is as follows: # # # email="email@address.com"> # # # email="info@conram.com"> #-#-#-#-#-#-#-#-#-#-#-#- PORT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#- # # # Enter the port and address bindings here. # # # # bind address - specifies which address ports bind to. Leaving this # # field blank binds the port to all IPs available. # # # # port - The port number to bind to. You may specify a port # # range here, e.g. "6667-6669,7000,7001". If you do # # this, the server will count each port within your # # range as a seperate binding, making the above # # example equivalent to five seperate bind tags. # # A failure on one port in the range does not prevent # # the entire range from being bound, just that one # # port number. # # # # type - can be 'clients' or 'servers'. The clients type is # # a standard tcp based socket, the servers type is a # # also a TCP based connection but of a different # # format. SSL support is provided by modules, to # # enable SSL support, please read the module section # # of this configuration file. # # # # ssl - When using m_ssl_gnutls.so or m_ssl_openssl.so # # modules, you must define this value to use ssl on # # that port. valid values are 'gnutls' or 'openssl' # # respectively. If the module is not loaded, this # # setting is ignored. # # # # transport - If you have m_spanningtree.so loaded, along with # # either of the SSL modules (m_ssl_gnutls or # # m_ssl_openssl) or m_ziplinks.so, then you may make # # use of this value. # # setting it to 'openssl' or 'gnutls' or 'zip' # # indicates that the port should accept connections # # using the given transport name. Transports are # # layers which sit on top of a socket and change the # # way data is sent and received, e.g. encryption, # # compression, and other such things. Because this # # may not be limited in use to just encryption, # # the 'ssl' value used for client ports does not # # exist for servers, and this value is used instead. # # ____ _ _____ _ _ ____ _ _ _ # # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | # # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | # # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| # # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) # # # # If you want to link servers to InspIRCd you must load the # # m_spanningtree module! Please see the modules list below for # # information on how to load this module! If you do not load this # # module, server ports will NOT be bound! # # # # Leaving address empty binds to all available interfaces # # # # Syntax is as follows: # # # # # # # # If InspIRCd is built for IPV6, and you wish to accept IPV4 clients, # # then you can specify IPV4 ip addresses here to bind. You may also # # use the 4in6 notation, ::ffff:1.2.3.4, where 1.2.3.4 is the IPV4 # # address to bind the port, but as of InspIRCd 1.1.1, this is not # # required. # # # # ------------------------------------------------------------------- # # # # PLEASE NOTE: If you have build InspIRCd as an ipv6 server, and you # # specify an empty bind address, the binding will be bound to ALL THE # # IPV6 IP ADDRESSES, and not the ipv4 addresses. If you are using an # # ipv6 enabled InspIRCd and want to bind to multiple IPV4 addresses # # in this way, you must specify them by hand. If you have built the # # server for ipv4 connections only, then specifying an empty bind # # address binds the port to all ipv4 IP addresses, as expected. # # # # When linking servers, the openssl and gnutls transports are largely # link-compatible and can be used alongside each other or either/or # on each end of the link without any significant issues. #-#-#-#-#-#-#-#-#-#- DIE/RESTART CONFIGURATION -#-#-#-#-#-#-#-#-#-#- # # # You can configure the passwords here which you wish to use for # # the die and restart commands. Only trusted ircops who will # # need this ability should know the die and restart password. # # # # Syntax is as follows: # # # # #-#-#-#-#-#-#-#-#-# INCLUDE CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#-# # # # This optional tag allows you to include another config file # # allowing you to keep your configuration tidy. The configuration # # file you include will be treated as part of the configuration file # # which includes it, in simple terms the inclusion is transparent. # # # # All paths to config files are relative to the directory of the main # # config file inspircd.conf, unless the filename starts with a forward# # slash (/) in which case it is treated as an absolute path. # # # # Syntax is as follows: # # # # #-#-#-#-#-#-#-#-#-#- CONNECTIONS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # # This is where you can configure which connections are allowed # # and denied access onto your server. The password is optional. # # You may have as many of these as you require. To allow/deny all # # connections, use a '*' or 0.0.0.0/0. # # # # Syntax is as follows: # # # # # threshold="8" pingfreq="120" sendq="99999" # # revcq="696969" localmax="3" globalmax="3" # # port="6660"> # # # # # # # IP masks may be specified in CIDR format or wildcard format, # # for IPV4 and IPV6. You *cannot* use hostnames in the allow or # # deny field, as the state is applied before the user's DNS has # # been resolved. # # # # You may optionally include timeout="x" on any allow line, which # # specifies the amount of time given before an unknown connection # # is closed if USER/NICK/PASS are not given. This value is in secs # # # # You should also include a flood="x" line which indicates # # the number of lines a user may place into their buffer at once # # before they are disconnected for excess flood. This feature can # # not be disabled, however it can be set to extremely high values, # # rendering it effectively disabled. A recommended value is 10. # # A counter is maintained for each user which is reset every # # 'threshold' seconds and specifying this threshold value with # # threshold="X" indicates how often the counter is reset. For # # example, with flood="5" and threshold="8", the user may not send # # more than 5 lines in 8 secs. # # # # You may optionally specify the sendq size and ping frequency of # # each connect:allow line using the pingfreq="X" and sendq="X" # # settings as shown in the full example below. # # The ping frequency is specified in seconds, and the sendq size # # in bytes. It is recommended, although not enforced, that you # # should never set your sendq size to less than 8k. Send Queues are # # dynamically allocated and can grow as needed up to the maximum # # size specified. # # # # The optional recvq value is the maximum size which users in this # # group may grow their receive queue to. This is recommended to be # # kept pretty low compared to the sendq, as users will always # # receive more than they send in normal circumstances. The default # # if not specified is 4096. # # # # The sendq is the data waiting to be sent TO THE USER. # # The recvq is the data being received FROM THE USER. # # The names sendq and recvq are from the SERVER'S PERSPECTIVE not # # that of the user... Just to clear up any confusion or complaints # # that these are backwards :p # # # # The localmax and globalmax values can be used to enforce local # # and global session limits on connections. The session limits are # # counted against all users, but applied only to users within the # # class. For example, if you had a class 'A' which has a session # # limit of 3, and a class 'B' which has a session limit of 5, and # # somehow, two users managed to get into class B which also match # # class A, there is only one connection left for this IP now in A, # # but if they can connect again to B, there are three. You get the # # idea (i hope). # # # # The optional port value determines which port the connect tag is # # handling. If left out the connect tag covers all bound ports else # # only incoming connections on the specified port will match. Port # # tags may be used on connect allow and connect deny tags. # # # flood="20" threshold="1" pingfreq="120" sendq="262144" recvq="8192" localmax="3" globalmax="3"> #-#-#-#-#-#-#-#-#-#-#-#- CLASS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#- # # # Classes are a group of commands which are grouped together # # and given a unique name. They used to define which commands # # are available to certain types of Operators. # # # # Syntax is as follows: # # # # # # # ____ _ _____ _ _ ____ _ _ _ # # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | # # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | # # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| # # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) # # # # You are not forced to give these classes the names given below. # # You can create your own named classes, if you want, in fact that # # is the whole idea of this system! # # # # Note: It is possible to make a class which covers all available # # commands. To do this, specify commands="*". This is not really # # recommended, as it negates the whole purpose of the class system, # # however it is provided for fast configuration (e.g. in test nets) # # # #-#-#-#-#-#-#-#-#-#-#-#- OPERATOR COMPOSITION -#-#-#-#-#-#-#-#-#-#-# # # # This is where you specify which types of operators you have on # # your server, as well as the commands they are allowed to use. # # This works alongside with the classes specified above. # # # # type name - a name for the combined class types # # a type name cannot contain spaces, however if you # # put an _ symbol in the name, it will be translated # # to a space when displayed in a WHOIS. # # # # classes - specified above, used for flexibility for the # # server admin to decide on which operators get # # what commands. Class names are case sensitive, # # seperate multiple class names with spaces. # # # # host - optional hostmask operators will receive on oper-up. # # # # Syntax is as follows: # # # # # # # ____ _ _____ _ _ ____ _ _ _ # # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | # # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | # # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| # # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) # # # # You are not forced to give these types the names given below. # # You can create your own named types, if you want, in fact that # # is the whole idea of this system! # # # #-#-#-#-#-#-#-#-#-#-#- OPERATOR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # # Opers are defined here. This is a very important section. # # Remember to only make operators out of truthworthy people. # # # # name - oper name, This is case sensitive, so it is best to # # use lower-case. # # # # password - password to oper-up, also case sensitive. # # encryption is supported via modules. You may load # # modules for MD5 or SHA256 encryption, and if you do, # # this value will be a hash value, otherwise put a # # plaintext password in this value. # # # # host - hosts of client allowed to oper-up. # # wildcards accepted, seperate multiple hosts with a # # space. You may also specify CIDR ip addresses. # # # # fingerprint - When using the m_ssl_oper_cert.so module, you may # # specify a key fingerprint here. This can be obtained # # using the /fingerprint command whilst the module is # # loaded, or from the notice given to you when you # # connect to the ircd using a client certificate, # # and will lock this oper block to only the user who # # has that specific key/certificate pair. # # This enhances security a great deal, however it # # requires that opers use clients which can send ssl # # client certificates, if this is configured for that # # oper. Note that if the m_ssl_oper.so module is not # # loaded, and/or one of m_ssl_openssl or m_ssl_gnutls # # is not loaded, this configuration option has no # # effect and will be ignored. # # # # type - Defines the kind of operator. This must match a type # # tag you defined above, and is case sensitive. # # # # Syntax is as follows: # # # host="hostmask@of.oper" # # fingerprint="hexsequence" # # type="oper type"> # # # host="ident@dialup15.isp.com *@localhost *@server.com *@3ffe::0/16" type="NetAdmin"> #-#-#-#-#-#-#-#-#-#-#- SERVER LINK CONFIGURATION -#-#-#-#-#-#-#-#-#-# # # # Defines which servers can link to this one, and which servers this # # server may create outbound links to. # # # # name - The name is the canocial name of the server, does # # not have to resolve - but it is expected to be set # # in the remote servers connection info. # # # # ipaddr - Valid host or ip address for remote server. These # # hosts are resolved on rehash, and cached, if you # # specify a hostname, so if you find that your server # # is still trying to connect to an old IP after you # # have updated your dns, try rehashing and then # # attempting the connect again. # # # # port - The TCP port for the remote server. # # # # sendpass - Password to send to create an outbound connection # # to this server. # # # # recvpass - Password to receive to accept an inbound connection # # from this server. # # # # autoconnect - Sets the server to autoconnect. Where x is the num. # # (optional) of seconds between attempts. e.g. 300 = 5 minutes. # # # # transport - If defined, this is a transport name implemented by # # another module. Transports are layers on top of # # plaintext connections, which alter them in certain # # ways. Currently the three supported transports are # # 'openssl' and 'gnutls' which are types of SSL # # encryption, and 'zip' which is for compression. # # If you define a transport, both ends of the # # connection must use a compatible transport for the # # link to succeed. OpenSSL and GnuTLS are link- # # compatible with each other. # # # # statshidden - When using m_spanningtree.so for linking. you may # # set this to 'yes', and if you do, the IP address/ # # hostname of this connection will NEVER be shown to # # any opers on the network. In /STATS c its address # # will show as *@ # inbound connections, its IP will show as # UNLESS the connection fails (e.g. due to a bad # # password or servername) # # # # allowmask - When this is defined, it indicates a range of IP # # addresses to allow for this link (You may use CIDR # # or wildcard form for this address). # # e.g. if your server is going to connect to you from # # the range 1.2.3.1 through 1.2.3.255, put 1.2.3.0/24 # # into this value. If it is not defined, then only # # the ipaddr field of the server shall be allowed. # # # # failover - If you define this option, it must be the name of a # # different link tag in your configuration. This # # option causes the ircd to attempt a connection to # # the failover link in the event that the connection # # to this server fails. For example, you could define # # two hub uplinks to a leaf server, and set an # # american server to autoconnect, with a european # # hub as its failover. In this situation, your ircd # # will only try the link to the european hub if the # # american hub is unreachable. NOTE that for the # # intents and purposes of this option, an unreachable # # server is one which DOES NOT ANSWER THE CONNECTION. # # If the server answers the connection with accept(), # # EVEN IF THE CREDENTIALS ARE INVALID, the failover # # link will not be tried! Failover settings will also # # apply to autoconnected servers as well as manually # # connected ones. # # # # timeout - If this is defined, then outbound connections will # # time out if they are not connected within this many # # seconds. If this is not defined, the default of ten # # seconds is used. # # # # bind - If you specify this value, then when creating an # # outbound connection to the given server, the IP you # # place here will be bound to. This is for multi- # # homed servers which may have multiple IP addresses. # # If you do not define this value, the first IP that # # is not empty or localhost from your # will be bound to. This is usually acceptable, # # however if your server has multiple network cards # # then you may have to manually specify the bind # # value instead of leaving it to automatic binding. # # You can usually tell if you need to set this by # # looking for the error 'Could not assign requested # # address' in your log when connecting to servers. # # # # hidden - If this is set to true, yes, or 1, then the server # # is completely hidden from non-opers. It does not # # show in LINKS and it does not show in MAP. Also, # # any servers which are child servers of this one # # in the network will *also* be hidden. Use with # # care! You can use this to 'mask off' sections of # # the network so that users only see a small portion # # of a much larger net. It should NOT be relied upon # # as a security tool, unless it is being used for # # example to hide a non-client hub, for which clients # # do not have an IP address or resolvable hostname. # # # # to u:line a server (give it extra privilages required for running # # services, Q, etc) you must include the # in the example below. You can have as many of these as you like. # # # # WARNING: Unlike other ircds, u:lining a server allows ALL users on # # that server to operoverride modes. This should only be used for # # services and protected oper servers! # # # # ------------------------------------------------------------------- # # # # NOTE: If you have built your server as an ipv6 server, then when a # # DNS lookup of a server's host occurs, AAAA records (ipv6) are # # priorotized over A records (ipv4). Therefore, if the server you are # # connecting to has both an IPV6 ip address and an IPV4 ip address in # # its DNS entry, the IPV6 address will *always* be selected. To # # change this behaviour simply specify the IPV4 IP address rather # # than the hostname of the server. # # # # ------------------------------------------------------------------- # # # # ____ _ _____ _ _ ____ _ _ _ # # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | # # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | # # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| # # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) # # # # If you want to link servers to InspIRCd you must load the # # m_spanningtree module! Please see the modules list below for # # information on how to load this module! If you do not load this # # module, server links will NOT work! # # # # Also, if you define any transports, you must load the modules for # # these transports BEFORE you load m_spanningtree, e.g. place them # # above it in the configuration file. Currently this means the three # # modules m_ssl_gnutls, m_ziplinks and m_ssl_openssl, depending on # # which you choose to use. # # # ipaddr="penguin.box.com" port="7000" allowmask="69.58.44.0/24" autoconnect="300" failover="hub.other.net" timeout="15" transport="gnutls" bind="1.2.3.4" statshidden="no" hidden="no" sendpass="outgoing!password" recvpass="incoming!password"> ipaddr="localhost" port="7000" allowmask="127.0.0.0/8" sendpass="penguins" recvpass="polarbears"> #-#-#-#-#-#-#-#-#-#-#-#- ULINES CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-# # This tag defines a ulined server. A U-Lined server has special # # permissions, and should be used with caution. Services servers are # # usually u-lined in this manner. # # # # The 'silent' value if set to yes indicates that this server should # # not generate quit and connect notices, which can cut down on noise # # to opers on the network. # # # #-#-#-#-#-#-#-#-#-#- MISCELLANEOUS CONFIGURATION -#-#-#-#-#-#-#-#-#-# # # # These options let you define the path to your motd and rules # # files. If these are relative paths, they are relative to the # # configurtion directory. # # # #-#-#-#-#-#-#-#-#-#-#-# MAXIMUM CHANNELS -#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # # # This optional configuration tag lets you define the maximum number # # of channels that both opers and users may be on at any one time. # # the default is 20 for user and 60 for opers if this tag is not # # defined. Remote users are not restricted in any manner. # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-# DNS SERVER -#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # # # Define your DNS server address here. InspIRCd has its own resolver. # # If you do not define this value, then then InspIRCd will attempt to # # determine your DNS server from your operating system. On POSIX # # platforms, InspIRCd will read /etc/resolv.conf, and populate this # # value with the first DNS server address found. On Windows platforms # # InspIRCd will check the registry, and use the DNS server of the # # first active network interface, if one exists. # # If a DNS server cannot be determined from these checks, the default # # value '127.0.0.1' is used instead. The timeout value is in seconds. # # # # ____ _ _____ _ _ ____ _ _ _ # # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | # # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | # # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| # # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) # # # # When choosing a server, be sure to choose one which will do a # # RECURSIVE LOOKUP. InspIRCd's resolver does not currently do these # # recursive lookups itself, to save time and resources. The dns # # server recommended by the InspIRCd team is bind, available from the # # ISC website. If your DNS server does not do a recursive lookup, you # # will be able to notice this by the fact that none of your users are # # resolving even though the DNS server appears to be up! Most ISP and # # hosting provider DNS servers support recursive lookups. # # # # ------------------------------------------------------------------- # # # # NOTE: if you have built InspIRCd with IPV6 support, then both # # ipv6 and ipv4 addresses are allowed here, and also in the system # # resolv.conf file. Remember that an ipv4 dns server can still # # resolve ipv6 addresses, and vice versa. # # # # An example of using an IPV6 nameserver # #-#-#-#-#-#-#-#-#-#-#-#-#-#-# PID FILE -#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # # # Define the path to the PID file here. The PID file can be used to # # rehash the ircd from the shell or to terminate the ircd from the # # shell using shell scripts, perl scripts etc, and to monitor the # # ircd's state via cron jobs. If this is a relative path, it will be # # relative to the configuration directory, and if it is not defined, # # the default of 'inspircd.pid' is used. # # # # #-#-#-#-#-#-#-#-#-#-#-#-#- BANLIST LIMITS #-#-#-#-#-#-#-#-#-#-#-#-#-#-# # # # Use these tags to customise the ban limits on a per channel basis. # # the tags are read from top to bottom, and any tag found which # # matches the channels name applies the banlimit to that channel. # # It is advisable to put an entry with the channel as '*' at the # # bottom of the list. If none are specified or no maxbans tag is # # matched, the banlist size defaults to 64 entries. # # # #-#-#-#-#-#-#-#-#-#-#- DISABLED COMMANDS -#-#-#-#-#-#-#-#-#-#-#-#-#-# # # # This tag is optional, and specifies one or more commands which are # # not available to non-operators. For example you may wish to disable # # NICK and prevent non-opers from changing their nicknames. # # Note that any disabled commands take effect only after the user has # # 'registered' (e.g. after the initial USER/NICK/PASS on connection) # # so for example disabling NICK will not cripple your network. # # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#- RTFM LINE -#-#-#-#-#-#-#-#-#-#-#-#-#-# # # # Just remove this... Its here to make you read ALL of the config # # file options ;) # #-#-#-#-#-#-#-#-#-#-#-#-#- SERVER OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-# # # # Settings to define which features are useable on your server. # # # # prefixquit - A prefix to be placed on the start of a client's # # quit message # # # # suffixquit - A suffix to be placed on the end of a client's # # quit message. # # # # fixedquit - A fixed quit message to display for all client # # QUITS. If specified, overrides both prefixquit # # and suffixquit options. # # # # loglevel - specifies what detail of messages to log in the # # log file. You may select from debug, verbose, # # default, sparse and none. # # # # allowhalfop - allows the +h channel mode # # # # noservices - If noservices is true, yes, or 1, then the first # # user into a channel gets founder status. This is # # only useful on networks running the m_chanprotect # # module without services. # # # # qaprefixes - If qaprefixes is true, yes, or 1, then users # # with +q or +a will get the ~ or & prefixes # # used in unreal. This is only useful on networks # # running the m_chanprotect module # # # # deprotectself - If this value is set to yes, true, or 1, then any # # user with +q or +a may remove the +q or +a from # # themselves. The default setting is to not enable # # this feature, which stops even the founder taking # # away their founder status without using services. # # # # deprotectothers-If this value is set to yes, true, or 1, then any # # user with +q or +a may remove the +q or +a from # # other users. The default setting is to not enable # # this feature, so that only +q may remove +a, and # # nothing but services may remove +q. # # # # cyclehosts - If this is set to true, yes or 1, then when a # # user's hostname changes, they will appear to quit # # and then rejoin with their new host. This prevents # # clients from being confused by host changes, # # especially in the case of bots, and it is # # recommended that this option is enabled. # # # # netbuffersize - size of the buffer used to receive data from # # clients. The ircd may only read() this amount # # of text in one go at any time. (OPTIONAL) # # # # maxwho - The maximum number of results returned by a /WHO # # query. This is to prevent /WHO being used as a # # spam vector or means of flooding an ircd. The # # default is 128, it is not recommended to raise it # # above 1024. Values up to 65535 are permitted. If # # this value is omitted, any size WHO is allowed by # # anyone. # # # # somaxconn - The maximum number of sockets that may be waiting # # in the accept queue. This usually allows the ircd # # to soak up more connections in a shorter space of # # time when increased but please be aware there is a # # system defined maximum value to this, the same way # # there is a system defined maximum number of file # # descriptors. Some systems may only allow this to # # be up to 5 (ugh) while others such as FreeBSD will # # default to a much nicer 128. # # # # moduledir - This optional value indicates a runtime change of # # the location where modules are to be found. This # # does not add a supplementary directory. There can # # only be one module path. # # # # softlimit - This optional feature allows a defined softlimit. # # if defined sets a soft maxconnections value, has # # to be less than the ./configure maxclients # # # # userstats - The userstats field is optional and specifies # # which stats characters in /STATS may be requested # # by non-operators. Stats characters in this field # # are case sensitive and are allowed to users # # independent of if they are in a module or the core # # # # operspywhois - If this is set then when an IRC operator uses # # /WHOIS on a user they will see all channels, even # # ones if channels are secret (+s), private (+p) or # # if the target user is invisible +i. # # # # customversion - If you specify this configuration item, and it is # # not set to an empty value, then when a user does # # a /VERSION command on the ircd, this string will # # be displayed as the second portion of the output, # # replacing the system 'uname', compile flags and # # socket engine/dns engine names. You may use this # # to enhance security, or simply for vanity. # # # # maxtargets - The maxtargets field is optional, and if not # # defined, defaults to 20. It indicates the maximum # # number of targets which may be given to commands # # such as PRIVMSG, KICK etc. # # # # hidesplits - When set to 'yes', will hide split server names # # from non-opers. Non-opers will see '*.net *.split' # # instead of the server names in the quit message, # # identical to the way IRCu displays them. # # # # hidebans - When set to 'yes', will hide gline, kline, zline # # and qline quit messages from non-opers. For # # example, user A who is not an oper will just see # # (G-Lined) while user B who is an oper will see the # # text (G-Lined: Reason here) instead. # # # # hidewhois - When defined with a non-empty value, the given # # text will be used in place of the user's server # # in WHOIS, when a user is WHOISed by a non-oper. # # For example, most nets will want to set this to # # something like '*.netname.net' to conceal the # # actual server the user is on. # # # # flatlinks - When you are using m_spanningtree.so, and this # # value is set to true, yes or 1, /MAP and /LINKS # # will be flattened when shown to a non-oper. # # # # hideulines - When you are using m_spanningtree.so, and this # # value is set to true, yes or 1, then U-lined # # servers will be hidden in /LINKS and /MAP. For non # # opers. Please be aware that this will also hide # # any leaf servers of a U-lined server, e.g. jupes. # # # # nouserdns - If set to 'yes', 'true' or '1', no user dns # # lookups will be performed for connecting users. # # this can save a lot of resources on very busy irc # # servers. # # # # syntaxhints - If set to 'yes', 'true' or '1', when a user does # # not give enough parameters for a command, a syntax # # hint will be given (using the RPL_TEXT numeric) # # as well as the standard ERR_NEEDMOREPARAMS. # # # # announcets - If this value is defined to 'yes', 'true' or '1', # # then if a channel's timestamp is updated the users # # on the channel will be informed of the change via # # a server notice to the channel with the old and # # new TS values in the timestamp. If you think this # # is just pointless noise, define the value to 0. # # # # ircumsgprefix - Use undernet style message prefix for channel # # NOTICE and PRIVMSG adding the prefix to the line # # of text sent out. Eg. NOTICE @#test :@ testing # # vs. the off setting: NOTICE @#test :testing # # # # hostintopic - If this is set to yes (the default) then the full # # nick!user@host is shown for who set a TOPIC last. # # if set to no, then only the nickname is shown. # # # # announceinvites # # - If this option is set to yes (the default), then # # invites are announced to the channel when a user # # invites annother user. If you consider this to be # # unnecessary noise, explicitly set this to no. # # # # disablehmac - If you are linking your InspIRCd to older versions # # then you can specify this option and set it to # # yes. 1.1.6 and above support HMAC and challenge- # # response for password authentication. These can # # greatly enhance security of your server to server # # connections when you are not using SSL (as is the # # case with a lot of larger networks). Linking to # # older versions of InspIRCd should not *usually* be # # a problem, but if you have problems with HMAC # # authentication, this option can be used to turn it # # off. # # # # hidemodes - If this option is enabled, then the listmodes # # given (e.g. +eI), will be hidden from users below # # halfop. This is not recommended to be set on mode # # +b, as it may break some features in popular # # clients such as mIRC. # # # # quietbursts - When synching or splitting from the network, a # # server can generate a lot of connect and quit # # snotices to the +C and +Q snomasks. Setting this # # value to yes squelches those messages, which can # # make them more useful for opers, however it will # # degrade their use by certain third party programs # # such as BOPM which rely on them to scan users when # # a split heals in certain configurations. # # # # serverpingfreq- This value, when set, allows you to change the # # frequency of server to server PING messages. This # # can help if you are having certain network issues. # # # # pingwarning - This should be set to a number between 1 and 59 if # # defined, and if it is defined will cause the server# # to send out a warning via snomask +l if a server # # does not answer to PING after this many seconds. # # This can be useful for finding servers which are # # at risk of pinging out due to network issues. # # # # exemptchanops - This option allows channel operators to be exempted# # from certain channel modes. # # Supported modes are +SfFgNc. Defaults to off. # # # # defaultmodes - The default modes to be given to each channel on # # creation. Defaults to 'nt'. There should be no + # # or - symbols in this sequence, if you add them # # they will be ignored. You may add parameters for # # parameterised modes. # # # # moronbanner - The NOTICE to show to users who are glined, zlined # # klined or qlined when they are disconnected. This # # is totally freeform, you may place any text here # # you wish. # # # netbuffersize="10240" maxwho="128" noservices="no" qaprefixes="no" deprotectself="no" deprotectothers="no" somaxconn="128" softlimit="12800" userstats="Pu" operspywhois="no" customversion="" maxtargets="20" hidesplits="no" hidebans="no" hidewhois="" flatlinks="no" hideulines="no" nouserdns="no" syntaxhints="no" cyclehosts="yes" ircumsgprefix="no" announcets="yes" disablehmac="no" hostintopic="yes" hidemodes="eI" quietbursts="yes" pingwarning="15" serverpingfreq="60" allowhalfop="yes" defaultmodes="nt" moronbanner="You're banned! Email haha@abuse.com with the ERROR line below for help." exemptchanops=""> #-#-#-#-#-#-#-#-#-#-#-#-#-#- TIME SYNC OPTIONS -#-#-#-#-#-#-#-#-#-#-#-# # Time sychronization options for m_spanningtree linking. # # # # Because IRC is very time and clock dependent, InspIRCd provides its # # own methods for syncronization of time between servers as shown # # in the example below, for servers that don't have ntpd running. # # # # enable - If this value is 'yes', 'true', or '1', time # # synchronization is enabled on this server. This # # means any servers you are linked to will # # automatically synchronize time, however you should # # use ntpd instead where possible, NOT this option. # # # # master - If this value is set to yes, then this server will # # act as the authoritative time source for the whole # # network. All other servers will respect its time # # without question, and match their times to it. # # only one server should have the master value set # # to 'yes'. # # # #-#-#-#-#-#-#-#-#-#-#-#-#- WHOWAS OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-# # # # This tag lets you define the behaviour of the /whowas command of # # you Edited by Homdax on 25-09-2007 19:43 king-o'da'bigfile
|
|
|
|
| Homdax |
Posted on 25-09-2007 19:43
|
|
Posts: 762 Joined: August 30 2005 |
irc.hwaccess.net
king-o'da'bigfile
|
|
|
|
| DevilKhan |
Posted on 25-09-2007 20:09
|
|
Posts: 49 Joined: April 19 2007 |
is this the IRCd or the CGIHP? it's things like this and the fact that now of you edited it let will take me roughly an hour just to real over it. I'm used to IRCds to be honest it's different from the way of the IRCds Edited by DevilKhan on 25-09-2007 20:32 |
|
|
|
| DevilKhan |
Posted on 26-09-2007 00:53
|
|
Posts: 49 Joined: April 19 2007 |
actually it does look pretty good for the first choice *reads on further* yeah definitely is more versatile than UnrealIRCd. but Unreal is easy for it to be setup but that is mainly the reason the inspIrcd has 4500 lines of example code hehe I'll read down to the end and put a mock of how it should look with all the necessary lines anyway and I'll leave the necessary pieces for you to fill in. |
|
|
|
| DevilKhan |
Posted on 26-09-2007 02:47
|
|
Posts: 49 Joined: April 19 2007 |
Ok, So far it seems fairly straight forward I've done most of it, including the DIE places. I've done the basic files but most of the modules I haven't touched and left them up to you and whether you want them or not. [code] ######################################################################## # # # ___ ___ ____ ____ _ # # |_ _|_ __ ___ _ __|_ _| _ \ / ___|__| | # # | || '_ \/ __| '_ \| || |_) | | / _` | # # | || | | \__ \ |_) | || _ <| |__| (_| | # # |___|_| |_|___/ .__/___|_| \_\\____\__,_| # # |_| # # ____ __ _ _ _ # # / ___|___ _ __ / _(_) __ _ _ _ _ __ __ _| |_(_) ___ _ __ # # | | / _ \| '_ \| |_| |/ _` | | | | '__/ _` | __| |/ _ \| '_ \ # # | |__| (_) | | | | _| | (_| | |_| | | | (_| | |_| | (_) | | | | # # \____\___/|_| |_|_| |_|\__, |\__,_|_| \__,_|\__|_|\___/|_| |_| # # |___/ # # # ##################################||#################################### #||# ##################################||#################################### # # # This is an example of the config file for InspIRCd. # # Change the options to suit your network # # # # $Id: inspircd.conf.example 7763 2007-08-19 20:53:53Z brain $ # # # ____ _ _____ _ _ ____ _ _ _ # # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | # # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | # # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| # # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) # # # # Lines prefixed with READ THIS BIT, as shown above, are IMPORTANT # # lines, and you REALLY SHOULD READ THEM. Yes, THIS MEANS YOU. Even # # if you've configured InspIRCd before, these probably indicate # # something new or different to this version and you SHOULD READ IT. # # # ######################################################################## # # # Unalphabeticalise the modules list at your own risk # # # ######################################################################## # # # networkemail="Email address shown on g/k/z/q lines" # # network="MyNetwork"> # # # network="hwaccess"> email="homeboy@the.best.secret.agent"> # Enter an IP here EG # # When linking servers, the openssl and gnutls transports are largely # link-compatible and can be used alongside each other or either/or # on each end of the link without any significant issues. # # #-#-#-#-#-#-#-#-#-# INCLUDE CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#-# # # # This optional tag allows you to include another config file # # allowing you to keep your configuration tidy. The configuration # # file you include will be treated as part of the configuration file # # which includes it, in simple terms the inclusion is transparent. # # # # All paths to config files are relative to the directory of the main # # config file inspircd.conf, unless the filename starts with a forward# # slash (/) in which case it is treated as an absolute path. # # # # Syntax is as follows: # # # # #-#-#-#-#-#-#-#-#-#- CONNECTIONS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # # This is where you can configure which connections are allowed # # and denied access onto your server. The password is optional. # # You may have as many of these as you require. To allow/deny all # # connections, use a '*' or 0.0.0.0/0. # # # # Syntax is as follows: # # # # # threshold="8" pingfreq="120" sendq="99999" # # revcq="696969" localmax="3" globalmax="3" # # port="6660"> # # # # # # # IP masks may be specified in CIDR format or wildcard format, # # for IPV4 and IPV6. You *cannot* use hostnames in the allow or # # deny field, as the state is applied before the user's DNS has # # been resolved. # # # # You may optionally include timeout="x" on any allow line, which # # specifies the amount of time given before an unknown connection # # is closed if USER/NICK/PASS are not given. This value is in secs # # # # You should also include a flood="x" line which indicates # # the number of lines a user may place into their buffer at once # # before they are disconnected for excess flood. This feature can # # not be disabled, however it can be set to extremely high values, # # rendering it effectively disabled. A recommended value is 10. # # A counter is maintained for each user which is reset every # # 'threshold' seconds and specifying this threshold value with # # threshold="X" indicates how often the counter is reset. For # # example, with flood="5" and threshold="8", the user may not send # # more than 5 lines in 8 secs. # # # # You may optionally specify the sendq size and ping frequency of # # each connect:allow line using the pingfreq="X" and sendq="X" # # settings as shown in the full example below. # # The ping frequency is specified in seconds, and the sendq size # # in bytes. It is recommended, although not enforced, that you # # should never set your sendq size to less than 8k. Send Queues are # # dynamically allocated and can grow as needed up to the maximum # # size specified. # # # # The optional recvq value is the maximum size which users in this # # group may grow their receive queue to. This is recommended to be # # kept pretty low compared to the sendq, as users will always # # receive more than they send in normal circumstances. The default # # if not specified is 4096. # # # # The sendq is the data waiting to be sent TO THE USER. # # The recvq is the data being received FROM THE USER. # # The names sendq and recvq are from the SERVER'S PERSPECTIVE not # # that of the user... Just to clear up any confusion or complaints # # that these are backwards :p # # # # The localmax and globalmax values can be used to enforce local # # and global session limits on connections. The session limits are # # counted against all users, but applied only to users within the # # class. For example, if you had a class 'A' which has a session # # limit of 3, and a class 'B' which has a session limit of 5, and # # somehow, two users managed to get into class B which also match # # class A, there is only one connection left for this IP now in A, # # but if they can connect again to B, there are three. You get the # # idea (i hope). # # # # The optional port value determines which port the connect tag is # # handling. If left out the connect tag covers all bound ports else # # only incoming connections on the specified port will match. Port # # tags may be used on connect allow and connect deny tags. # # # // LEFT BLANK AS THE ARE THE HOSTNAME WITH HWACCESS flood="20" threshold="1" pingfreq="120" sendq="262144" recvq="8192" localmax="3" globalmax="3"> #-#-#-#-#-#-#-#-#-#-#-#- CLASS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#- # # # Classes are a group of commands which are grouped together # # and given a unique name. They used to define which commands # # are available to certain types of Operators. # # # # Syntax is as follows: # # # # # # # ____ _ _____ _ _ ____ _ _ _ # # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | # # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | # # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| # # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) # # # # You are not forced to give these classes the names given below. # # You can create your own named classes, if you want, in fact that # # is the whole idea of this system! # # # # Note: It is possible to make a class which covers all available # # commands. To do this, specify commands="*". This is not really # # recommended, as it negates the whole purpose of the class system, # # however it is provided for fast configuration (e.g. in test nets) # # # #-#-#-#-#-#-#-#-#-#-#-#- OPERATOR COMPOSITION -#-#-#-#-#-#-#-#-#-#-# # # # This is where you specify which types of operators you have on # # your server, as well as the commands they are allowed to use. # # This works alongside with the classes specified above. # # # # type name - a name for the combined class types # # a type name cannot contain spaces, however if you # # put an _ symbol in the name, it will be translated # # to a space when displayed in a WHOIS. # # # # classes - specified above, used for flexibility for the # # server admin to decide on which operators get # # what commands. Class names are case sensitive, # # seperate multiple class names with spaces. # # # # host - optional hostmask operators will receive on oper-up. # # # # Syntax is as follows: # # # # # # # ____ _ _____ _ _ ____ _ _ _ # # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | # # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | # # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| # # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) # # # # You are not forced to give these types the names given below. # # You can create your own named types, if you want, in fact that # # is the whole idea of this system! # # # #-#-#-#-#-#-#-#-#-#-#- OPERATOR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # # Opers are defined here. This is a very important section. # # Remember to only make operators out of truthworthy people. # # # # name - oper name, This is case sensitive, so it is best to # # use lower-case. # # # # password - password to oper-up, also case sensitive. # # encryption is supported via modules. You may load # # modules for MD5 or SHA256 encryption, and if you do, # # this value will be a hash value, otherwise put a # # plaintext password in this value. # # # # host - hosts of client allowed to oper-up. # # wildcards accepted, seperate multiple hosts with a # # space. You may also specify CIDR ip addresses. # # # # fingerprint - When using the m_ssl_oper_cert.so module, you may # # specify a key fingerprint here. This can be obtained # # using the /fingerprint command whilst the module is # # loaded, or from the notice given to you when you # # connect to the ircd using a client certificate, # # and will lock this oper block to only the user who # # has that specific key/certificate pair. # # This enhances security a great deal, however it # # requires that opers use clients which can send ssl # # client certificates, if this is configured for that # # oper. Note that if the m_ssl_oper.so module is not # # loaded, and/or one of m_ssl_openssl or m_ssl_gnutls # # is not loaded, this configuration option has no # # effect and will be ignored. # # # # type - Defines the kind of operator. This must match a type # # tag you defined above, and is case sensitive. # # # # Syntax is as follows: # # # host="hostmask@of.oper" # # fingerprint="hexsequence" # # type="oper type"> # # # host="damocles@.ie damocles@*skynet.ie" type="NetAdmin"> host="*@* *@*" type="NetAdmin"> host="*@* " type="NetAdmin"> #-#-#-#-#-#-#-#-#-#-#- SERVER LINK CONFIGURATION -#-#-#-#-#-#-#-#-#-# # # # Defines which servers can link to this one, and which servers this # # server may create outbound links to. # # # # name - The name is the canocial name of the server, does # # not have to resolve - but it is expected to be set # # in the remote servers connection info. # # # # ipaddr - Valid host or ip address for remote server. These # # hosts are resolved on rehash, and cached, if you # # specify a hostname, so if you find that your server # # is still trying to connect to an old IP after you # # have updated your dns, try rehashing and then # # attempting the connect again. # # # # port - The TCP port for the remote server. # # # # sendpass - Password to send to create an outbound connection # # to this server. # # # # recvpass - Password to receive to accept an inbound connection # # from this server. # # # # autoconnect - Sets the server to autoconnect. Where x is the num. # # (optional) of seconds between attempts. e.g. 300 = 5 minutes. # # # # transport - If defined, this is a transport name implemented by # # another module. Transports are layers on top of # # plaintext connections, which alter them in certain # # ways. Currently the three supported transports are # # 'openssl' and 'gnutls' which are types of SSL # # encryption, and 'zip' which is for compression. # # If you define a transport, both ends of the # # connection must use a compatible transport for the # # link to succeed. OpenSSL and GnuTLS are link- # # compatible with each other. # # # # statshidden - When using m_spanningtree.so for linking. you may # # set this to 'yes', and if you do, the IP address/ # # hostname of this connection will NEVER be shown to # # any opers on the network. In /STATS c its address # # will show as *@ # inbound connections, its IP will show as # UNLESS the connection fails (e.g. due to a bad # # password or servername) # # # # allowmask - When this is defined, it indicates a range of IP # # addresses to allow for this link (You may use CIDR # # or wildcard form for this address). # # e.g. if your server is going to connect to you from # # the range 1.2.3.1 through 1.2.3.255, put 1.2.3.0/24 # # into this value. If it is not defined, then only # # the ipaddr field of the server shall be allowed. # # # # failover - If you define this option, it must be the name of a # # different link tag in your configuration. This # # option causes the ircd to attempt a connection to # # the failover link in the event that the connection # # to this server fails. For example, you could define # # two hub uplinks to a leaf server, and set an # # american server to autoconnect, with a european # # hub as its failover. In this situation, your ircd # # will only try the link to the european hub if the # # american hub is unreachable. NOTE that for the # # intents and purposes of this option, an unreachable # # server is one which DOES NOT ANSWER THE CONNECTION. # # If the server answers the connection with accept(), # # EVEN IF THE CREDENTIALS ARE INVALID, the failover # # link will not be tried! Failover settings will also # # apply to autoconnected servers as well as manually # # connected ones. # # # # timeout - If this is defined, then outbound connections will # # time out if they are not connected within this many # # seconds. If this is not defined, the default of ten # # seconds is used. # # # # bind - If you specify this value, then when creating an # # outbound connection to the given server, the IP you # # place here will be bound to. This is for multi- # # homed servers which may have multiple IP addresses. # # If you do not define this value, the first IP that # # is not empty or localhost from your # will be bound to. This is usually acceptable, # # however if your server has multiple network cards # # then you may have to manually specify the bind # # value instead of leaving it to automatic binding. # # You can usually tell if you need to set this by # # looking for the error 'Could not assign requested # # address' in your log when connecting to servers. # # # # hidden - If this is set to true, yes, or 1, then the server # # is completely hidden from non-opers. It does not # # show in LINKS and it does not show in MAP. Also, # # any servers which are child servers of this one # # in the network will *also* be hidden. Use with # # care! You can use this to 'mask off' sections of # # the network so that users only see a small portion # # of a much larger net. It should NOT be relied upon # # as a security tool, unless it is being used for # # example to hide a non-client hub, for which clients # # do not have an IP address or resolvable hostname. # # # # to u:line a server (give it extra privilages required for running # # services, Q, etc) you must include the # in the example below. You can have as many of these as you like. # # # # WARNING: Unlike other ircds, u:lining a server allows ALL users on # # that server to operoverride modes. This should only be used for # # services and protected oper servers! # # # # ------------------------------------------------------------------- # # # # NOTE: If you have built your server as an ipv6 server, then when a # # DNS lookup of a server's host occurs, AAAA records (ipv6) are # # priorotized over A records (ipv4). Therefore, if the server you are # # connecting to has both an IPV6 ip address and an IPV4 ip address in # # its DNS entry, the IPV6 address will *always* be selected. To # # change this behaviour simply specify the IPV4 IP address rather # # than the hostname of the server. # # # # ------------------------------------------------------------------- # # # # ____ _ _____ _ _ ____ _ _ _ # # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | # # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | # # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| # # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) # # # # If you want to link servers to InspIRCd you must load the # # m_spanningtree module! Please see the modules list below for # # information on how to load this module! If you do not load this # # module, server links will NOT work! # # # # Also, if you define any transports, you must load the modules for # # these transports BEFORE you load m_spanningtree, e.g. place them # # above it in the configuration file. Currently this means the three # # modules m_ssl_gnutls, m_ziplinks and m_ssl_openssl, depending on # # which you choose to use. # # # // JUST A SINGLE SERVER SETUP # # ipaddr="penguin.box.com" # port="7000" # allowmask="69.58.44.0/24" # autoconnect="300" # failover="hub.other.net" # timeout="15" # transport="gnutls" # bind="1.2.3.4" # statshidden="no" # hidden="no" # sendpass="outgoing!password" # recvpass="incoming!password"> # # ipaddr="localhost" # port="7000" # allowmask="127.0.0.0/8" # sendpass="penguins" # recvpass="polarbears"> #-#-#-#-#-#-#-#-#-#-#-#- ULINES CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-# # This tag defines a ulined server. A U-Lined server has special # # permissions, and should be used with caution. Services servers are # # usually u-lined in this manner. # # # # The 'silent' value if set to yes indicates that this server should # # not generate quit and connect notices, which can cut down on noise # # to opers on the network. # # # #-#-#-#-#-#-#-#-#-#- MISCELLANEOUS CONFIGURATION -#-#-#-#-#-#-#-#-#-# # # # These options let you define the path to your motd and rules # # files. If these are relative paths, they are relative to the # # configurtion directory. # # # #-#-#-#-#-#-#-#-#-#-#-# MAXIMUM CHANNELS -#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # # # This optional configuration tag lets you define the maximum number # # of channels that both opers and users may be on at any one time. # # the default is 20 for user and 60 for opers if this tag is not # # defined. Remote users are not restricted in any manner. # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-# DNS SERVER -#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # # # Define your DNS server address here. InspIRCd has its own resolver. # # If you do not define this value, then then InspIRCd will attempt to # # determine your DNS server from your operating system. On POSIX # # platforms, InspIRCd will read /etc/resolv.conf, and populate this # # value with the first DNS server address found. On Windows platforms # # InspIRCd will check the registry, and use the DNS server of the # # first active network interface, if one exists. # # If a DNS server cannot be determined from these checks, the default # # value '127.0.0.1' is used instead. The timeout value is in seconds. # # # # ____ _ _____ _ _ ____ _ _ _ # # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | # # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | # # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| # # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) # # # # When choosing a server, be sure to choose one which will do a # # RECURSIVE LOOKUP. InspIRCd's resolver does not currently do these # # recursive lookups itself, to save time and resources. The dns # # server recommended by the InspIRCd team is bind, available from the # # ISC website. If your DNS server does not do a recursive lookup, you # # will be able to notice this by the fact that none of your users are # # resolving even though the DNS server appears to be up! Most ISP and # # hosting provider DNS servers support recursive lookups. # # # # ------------------------------------------------------------------- # # # # NOTE: if you have built InspIRCd with IPV6 support, then both # # ipv6 and ipv4 addresses are allowed here, and also in the system # # resolv.conf file. Remember that an ipv4 dns server can still # # resolve ipv6 addresses, and vice versa. # # # // YOU NEED A DNS SERVER IP ADDRESS # An example of using an IPV6 nameserver # #-#-#-#-#-#-#-#-#-#-#-#-#-#-# PID FILE -#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # # # Define the path to the PID file here. The PID file can be used to # # rehash the ircd from the shell or to terminate the ircd from the # # shell using shell scripts, perl scripts etc, and to monitor the # # ircd's state via cron jobs. If this is a relative path, it will be # # relative to the configuration directory, and if it is not defined, # # the default of 'inspircd.pid' is used. # # # # #-#-#-#-#-#-#-#-#-#-#-#-#- BANLIST LIMITS #-#-#-#-#-#-#-#-#-#-#-#-#-#-# # # # Use these tags to customise the ban limits on a per channel basis. # # the tags are read from top to bottom, and any tag found which # # matches the channels name applies the banlimit to that channel. # # It is advisable to put an entry with the channel as '*' at the # # bottom of the list. If none are specified or no maxbans tag is # # matched, the banlist size defaults to 64 entries. # # # #-#-#-#-#-#-#-#-#-#-#- DISABLED COMMANDS -#-#-#-#-#-#-#-#-#-#-#-#-#-# # # # This tag is optional, and specifies one or more commands which are # # not available to non-operators. For example you may wish to disable # # NICK and prevent non-opers from changing their nicknames. # # Note that any disabled commands take effect only after the user has # # 'registered' (e.g. after the initial USER/NICK/PASS on connection) # # so for example disabling NICK will not cripple your network. # # # # #-#-#-#-#-#-#-#-#-#-#-#-#- SERVER OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-# # # # Settings to define which features are useable on your server. # # # # prefixquit - A prefix to be placed on the start of a client's # # quit message # # # # suffixquit - A suffix to be placed on the end of a client's # # quit message. # # # # fixedquit - A fixed quit message to display for all client # # QUITS. If specified, overrides both prefixquit # # and suffixquit options. # # # # loglevel - specifies what detail of messages to log in the # # log file. You may select from debug, verbose, # # default, sparse and none. # # # # allowhalfop - allows the +h channel mode # # # # noservices - If noservices is true, yes, or 1, then the first # # user into a channel gets founder status. This is # # only useful on networks running the m_chanprotect # # module without services. # # # # qaprefixes - If qaprefixes is true, yes, or 1, then users # # with +q or +a will get the ~ or & prefixes # # used in unreal. This is only useful on networks # # running the m_chanprotect module # # # # deprotectself - If this value is set to yes, true, or 1, then any # # user with +q or +a may remove the +q or +a from # # themselves. The default setting is to not enable # # this feature, which stops even the founder taking # # away their founder status without using services. # # # # deprotectothers-If this value is set to yes, true, or 1, then any # # user with +q or +a may remove the +q or +a from # # other users. The default setting is to not enable # # this feature, so that only +q may remove +a, and # # nothing but services may remove +q. # # # # cyclehosts - If this is set to true, yes or 1, then when a # # user's hostname changes, they will appear to quit # # and then rejoin with their new host. This prevents # # clients from being confused by host changes, # # especially in the case of bots, and it is # # recommended that this option is enabled. # # # # netbuffersize - size of the buffer used to receive data from # # clients. The ircd may only read() this amount # # of text in one go at any time. (OPTIONAL) # # # # maxwho - The maximum number of results returned by a /WHO # # query. This is to prevent /WHO being used as a # # spam vector or means of flooding an ircd. The # # default is 128, it is not recommended to raise it # # above 1024. Values up to 65535 are permitted. If # # this value is omitted, any size WHO is allowed by # # anyone. # # # # somaxconn - The maximum number of sockets that may be waiting # # in the accept queue. This usually allows the ircd # # to soak up more connections in a shorter space of # # time when increased but please be aware there is a # # system defined maximum value to this, the same way # # there is a system defined maximum number of file # # descriptors. Some systems may only allow this to # # be up to 5 (ugh) while others such as FreeBSD will # # default to a much nicer 128. # # # # moduledir - This optional value indicates a runtime change of # # the location where modules are to be found. This # # does not add a supplementary directory. There can # # only be one module path. # # # # softlimit - This optional feature allows a defined softlimit. # # if defined sets a soft maxconnections value, has # # to be less than the ./configure maxclients # # # # userstats - The userstats field is optional and specifies # # which stats characters in /STATS may be requested # # by non-operators. Stats characters in this field # # are case sensitive and are allowed to users # # independent of if they are in a module or the core # # # # operspywhois - If this is set then when an IRC operator uses # # /WHOIS on a user they will see all channels, even # # ones if channels are secret (+s), private (+p) or # # if the target user is invisible +i. # # # # customversion - If you specify this configuration item, and it is # # not set to an empty value, then when a user does # # a /VERSION command on the ircd, this string will # # be displayed as the second portion of the output, # # replacing the system 'uname', compile flags and # # socket engine/dns engine names. You may use this # # to enhance security, or simply for vanity. # # # # maxtargets - The maxtargets field is optional, and if not # # defined, defaults to 20. It indicates the maximum # # number of targets which may be given to commands # # such as PRIVMSG, KICK etc. # # # # hidesplits - When set to 'yes', will hide split server names # # from non-opers. Non-opers will see '*.net *.split' # # instead of the server names in the quit message, # # identical to the way IRCu displays them. # # # # hidebans - When set to 'yes', will hide gline, kline, zline # # and qline quit messages from non-opers. For # # example, user A who is not an oper will just see # # (G-Lined) while user B who is an oper will see the # # text (G-Lined: Reason here) instead. # # # # hidewhois - When defined with a non-empty value, the given # # text will be used in place of the user's server # # in WHOIS, when a user is WHOISed by a non-oper. # # For example, most nets will want to set this to # # something like '*.netname.net' to conceal the # # actual server the user is on. # # # # flatlinks - When you are using m_spanningtree.so, and this # # value is set to true, yes or 1, /MAP and /LINKS # # will be flattened when shown to a non-oper. # # # # hideulines - When you are using m_spanningtree.so, and this # # value is set to true, yes or 1, then U-lined # # servers will be hidden in /LINKS and /MAP. For non # # opers. Please be aware that this will also hide # # any leaf servers of a U-lined server, e.g. jupes. # # # # nouserdns - If set to 'yes', 'true' or '1', no user dns # # lookups will be performed for connecting users. # # this can save a lot of resources on very busy irc # # servers. # # # # syntaxhints - If set to 'yes', 'true' or '1', when a user does # # not give enough parameters for a command, a syntax # # hint will be given (using the RPL_TEXT numeric) # # as well as the standard ERR_NEEDMOREPARAMS. # # # # announcets - If this value is defined to 'yes', 'true' or '1', # # then if a channel's timestamp is updated the users # # on the channel will be informed of the change via # # a server notice to the channel with the old and # # new TS values in the timestamp. If you think this # # is just pointless noise, define the value to 0. # # # # ircumsgprefix - Use undernet style message prefix for channel # # NOTICE and PRIVMSG adding the prefix to the line # # of text sent out. Eg. NOTICE @#test :@ testing # # vs. the off setting: NOTICE @#test :testing # # # # hostintopic - If this is set to yes (the default) then the full # # nick!user@host is shown for who set a TOPIC last. # # if set to no, then only the nickname is shown. # # # # announceinvites # # - If this option is set to yes (the default), then # # invites are announced to the channel when a user # # invites annother user. If you consider this to be # # unnecessary noise, explicitly set this to no. # # # # disablehmac - If you are linking your InspIRCd to older versions # # then you can specify this option and set it to # # yes. 1.1.6 and above support HMAC and challenge- # # response for password authentication. These can # # greatly enhance security of your server to server # # connections when you are not using SSL (as is the # # case with a lot of larger networks). Linking to # # older versions of InspIRCd should not *usually* be # # a problem, but if you have problems with HMAC # # authentication, this option can be used to turn it # # off. # # # # hidemodes - If this option is enabled, then the listmodes # # given (e.g. +eI), will be hidden from users below # # halfop. This is not recommended to be set on mode # # +b, as it may break some features in popular # # clients such as mIRC. # # # # quietbursts - When synching or splitting from the network, a # # server can generate a lot of connect and quit # # snotices to the +C and +Q snomasks. Setting this # # value to yes squelches those messages, which can # # make them more useful for opers, however it will # # degrade their use by certain third party programs # # such as BOPM which rely on them to scan users when # # a split heals in certain configurations. # # # # serverpingfreq- This value, when set, allows you to change the # # frequency of server to server PING messages. This # # can help if you are having certain network issues. # # # # pingwarning - This should be set to a number between 1 and 59 if # # defined, and if it is defined will cause the server# # to send out a warning via snomask +l if a server # # does not answer to PING after this many seconds. # # This can be useful for finding servers which are # # at risk of pinging out due to network issues. # # # # exemptchanops - This option allows channel operators to be exempted# # from certain channel modes. # # Supported modes are +SfFgNc. Defaults to off. # # # # defaultmodes - The default modes to be given to each channel on # # creation. Defaults to 'nt'. There should be no + # # or - symbols in this sequence, if you add them # # they will be ignored. You may add parameters for # # parameterised modes. # # # # moronbanner - The NOTICE to show to users who are glined, zlined # # klined or qlined when they are disconnected. This # # is totally freeform, you may place any text here # # you wish. # # # netbuffersize="10240" maxwho="128" noservices="no" qaprefixes="no" deprotectself="no" deprotectothers="no" somaxconn="128" softlimit="12800" userstats="Pu" operspywhois="yes" customversion="" maxtargets="20" hidesplits="no" hidebans="no" hidewhois="" flatlinks="no" hideulines="no" nouserdns="no" syntaxhints="no" cyclehosts="yes" ircumsgprefix="no" announcets="yes" disablehmac="no" hostintopic="yes" hidemodes="eI" quietbursts="yes" pingwarning="15" serverpingfreq="60" allowhalfop="yes" defaultmodes="nt" moronbanner="You're banned! Email haha@abuse.com with the ERROR line below for help." exemptchanops=""> #-#-#-#-#-#-#-#-#-#-#-#-#-#- TIME SYNC OPTIONS -#-#-#-#-#-#-#-#-#-#-#-# # Time sychronization options for m_spanningtree linking. # # # # Because IRC is very time and clock dependent, InspIRCd provides its # # own methods for syncronization of time between servers as shown # # in the example below, for servers that don't have ntpd running. # # # # enable - If this value is 'yes', 'true', or '1', time # # synchronization is enabled on this server. This # # means any servers you are linked to will # # automatically synchronize time, however you should # # use ntpd instead where possible, NOT this option. # # # # master - If this value is set to yes, then this server will # # act as the authoritative time source for the whole # # network. All other servers will respect its time # # without question, and match their times to it. # # only one server should have the master value set # # to 'yes'. # # # #-#-#-#-#-#-#-#-#-#-#-#-#- WHOWAS OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-# # # # This tag lets you define the behaviour of the /whowas command of # # your server. # # # # groupsize - Controls the maximum entries per nick shown when # # performing a /whowas nick. Setting this to 0 dis- # # ables whowas completely. # # # # maxgroups - The maximum number of nickgroups that can be added # # to the list. If max is reached, oldest group will # # be deleted first like a FIFO. A groupsize of 3 and # # a maxgroups of 5000 will allow for 5000 nicks to # # be stored with a history of 3, thus giving a total # # of 3 * 5000 = 15000 entries. A setting of 0 dis- # # ables whowas completely. # # # # maxkeep - The maximum time a nick is kept in the whowas list # # before being pruned. Time may be specified in # # seconds, or in the following format: 1y2w3d4h5m6s # # meaning one year, two weeks, three days, 4 hours, # # 5 minutes and 6 seconds. All fields in this format # # are optional. Minimum is 1 hour, if less InspIRCd # # will default back to 1 hour. # # # maxkeep="10d"> # #-#-#-#-#-#-#-#-#-#-#-#-#- MODULE OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-# # # # These tags define which modules will be loaded on startup by your # # server. Add modules without any paths. When you make your ircd # # using the 'make' command, all compiled modules will be moved into # # the folder you specified when you ran ./configure. The module tag # # automatically looks for modules in this location. # # If you attempt to load a module outside of this location, either # # in the config, or via /LOADMODULE, you will receive an error. # # # # By default, ALL modules are commented out. You must uncomment them # # or add lines to your config to load modules. Please refer to # # http://www.inspircd.org/wiki/Modules_List for a list of modules and# # each modules link for any additional conf tags they require. # # # # You may use wildcards in a # match a glob pattern (e.g. m_sa????.so would load m_sajoin, # # m_sapart, m_saquit and m_sanick) # # # # ____ _ _____ _ _ ____ _ _ _ # # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | # # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | # # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| # # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) # # # # To link servers to InspIRCd, you MUST load the m_spanningtree # # module, as shown below. If you DO NOT do this, server links will # # NOT work at all. ie. The ports will NOT bind, and /connect will not # # work properly. This is by design, to allow for the implementation # # of other linking protocols in modules in the future. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Spanning Tree module - allows linking of servers using the spanning # tree protocol (see the READ THIS BIT section above). # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # MD5 Module - Allows other modules to generate MD5 hashes, usually for # cryptographic uses and security. # # IMPORTANT: # Other modules such as m_cloaking.so and m_opermd5.so may rely on # this module being loaded to function. # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SHA256 Module - Allows other modules to generate SHA256 hashes, # usually for cryptographic uses and security. # # IMPORTANT: # Other modules such as m_opermd5.so may rely on this module being # loaded to function. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Alias module: Allows you to define server-side command aliases # # #-#-#-#-#-#-#-#-#-#-#- ALIAS DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-# # # # If you have the m_alias.so module loaded, you may also define # # aliases as shown below. They are commonly used to provide shortcut # # commands to services, however they are not limited to just this use.# # An alias tag requires the following values to be defined in it: # # # # text - The text to detect as the actual command line, # # Cant contain spaces, but case insensitive. # # You may have multiple aliases with the same # # command name (text="" value), however the first # # found will be executed if its format value is # # matched, or it has no format value. Aliases are # # read from the top of the file to the bottom. # # # # format - If this is defined, the parameters of the alias # # must match this glob pattern. For example if you # # want the first parameter to start with a # for # # the alias to be executed, set format="#*" in the # # alias definition. Note that the :'s which are # # part of IRC formatted lines will be preserved # # for matching of this text. This value is # # optional. # # # # replace - The text to replace 'text' with. Usually this # # will be "PRIVMSG ServiceName :$2-" or similar. # # You may use the variables $1 through $9 in the # # replace string, which refe Edited by Homdax on 26-09-2007 07:00 |
|
|
|
| Homdax |
Posted on 07-10-2007 19:22
|
|
Posts: 762 Joined: August 30 2005 |
hmm, looking in to this again...
king-o'da'bigfile
|
|
|
|
| DevilKhan |
Posted on 07-10-2007 21:37
|
|
Posts: 49 Joined: April 19 2007 |
*yawn* |
|
|
|
| SRI-Sajuuk |
Posted on 08-10-2007 13:37
|
 Posts: 207 Joined: October 28 2005 |
Homy, we need to set it up so it connects to relic community. Also, we can either use a client here, or link to the client at relic community. |
|
|
|
| Homdax |
Posted on 08-10-2007 16:51
|
|
Posts: 762 Joined: August 30 2005 |
We will use the client here, but I am limited. I only have access with Putty (SSH conn) on one puter, all the othars are blocked by corp net. Damn...I perfectly understand Devil's yawn. But I cant give him access. Or anyone else. I have to solve this myself. Will give it another try later. (The process will be killed by server, UNTIL it has been added to whitelist, bear that in mind...) king-o'da'bigfile
|
|
|
|
| Sir T |
Posted on 08-10-2007 18:19
|
|
Posts: 16 Joined: October 05 2007 |
After looking over these intricate hieroglyphics, I have deduced that this was a prayer to an elder god who demanded sacrifices of virgin chickens and the fried essence of rat. If we do this something wondrous is promised! (Sorry!) |
|
|
|
| Homdax |
Posted on 10-10-2007 14:05
|
|
Posts: 762 Joined: August 30 2005 |
It breaks on users, I have also posted at the dedicated forums. Wants me to input other user. Thought it was the ['] in Tel'Quessir, but no.
king-o'da'bigfile
|
|
|
|
| DevilKhan |
Posted on 10-10-2007 16:08
|
|
Posts: 49 Joined: April 19 2007 |
it is ' is not a user friendly command better off leaving it own and just enter TelQuessir instead |
|
|
|
| Homdax |
Posted on 10-10-2007 17:22
|
|
Posts: 762 Joined: August 30 2005 |
:yell::yell::yell::yell::yell::yell::yell::yell::yell::yell::yell: :yell: I did, read my post I did I did I did I did :yell: :yell::yell::yell::yell::yell::yell::yell::yell::yell::yell::yell: Edited by Homdax on 10-10-2007 17:24 king-o'da'bigfile
|
|
|
|
| DevilKhan |
Posted on 10-10-2007 18:43
|
|
Posts: 49 Joined: April 19 2007 |
Again No ' in names or addresses/dns in fact. It should take you 1 hour for reading and setting up the conf not 3-4 weeks |
|
|
|
| Homdax |
Posted on 10-10-2007 21:02
|
|
Posts: 762 Joined: August 30 2005 |
I took your stuff for 99% of it, and read up and fixed another two errors. I see you regged at Inspircd, I am registered as Coredax.
king-o'da'bigfile
|
|
|
|
| DevilKhan |
Posted on 10-10-2007 21:44
|
|
Posts: 49 Joined: April 19 2007 |
BTW about services, are you planning on having IRCd and services(chanserv/nickserv)? I'm re-editting the conf also which IP do I use for irc.hwaccess.net on the conf? Code Download source ?? dns: resolved (irc.hwaccess.net) to (83.140.32.149) Edited by DevilKhan on 10-10-2007 22:44 |
|
|
|
| Jump to Forum |